# Makefile.in generated by automake 1.10 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 483858 $ 
# kile/dist/build/kile-2.0/translations/ru/messages/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



pkgdatadir = $(datadir)/office
pkglibdir = $(libdir)/office
pkgincludedir = $(includedir)/office
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
subdir = kile/dist/build/kile-2.0/translations/ru/messages
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
#>- 	html-recursive info-recursive install-data-recursive \
#>- 	install-dvi-recursive install-exec-recursive \
#>- 	install-html-recursive install-info-recursive \
#>- 	install-pdf-recursive install-ps-recursive install-recursive \
#>- 	installcheck-recursive installdirs-recursive pdf-recursive \
#>- 	ps-recursive uninstall-recursive
#>+ 7
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
#>+ 1
DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
ACLOCAL = ${SHELL} /home/michel/kile/test/office/admin/missing --run aclocal-1.10
AMTAR = ${SHELL} /home/michel/kile/test/office/admin/missing --run tar
AR = ar
ARTSCCONFIG = /usr/bin/artsc-config
AUTOCONF = $(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure
AUTODIRS = 
AUTOHEADER = ${SHELL} /home/michel/kile/test/office/admin/missing --run autoheader
AUTOMAKE = ${SHELL} /home/michel/kile/test/office/admin/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute
CONF_FILES =  $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in $(top_srcdir)/./datakiosk/configure.in.in $(top_srcdir)/./datakiosk/datakiosk/configure.in.in $(top_srcdir)/./kile/dist/build/kile-2.0/configure.in.bot $(top_srcdir)/./kile/dist/build/kile-2.0/configure.in.in $(top_srcdir)/configure.in.bot
CPP = gcc -E
CPPFLAGS =  -DQT_THREAD_SUPPORT  -D_REENTRANT
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION
CYGPATH_W = echo
DCOPIDL = /usr/bin/dcopidl
DCOPIDL2CPP = /usr/bin/dcopidl2cpp
DCOPIDLNG = /usr/bin/dcopidlng
DCOP_DEPENDENCIES = $(DCOPIDL) $(DCOPIDLNG)
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOXYGEN = /usr/bin/doxygen
DOXYGEN_PROJECT_NAME = The API Reference
DOXYGEN_PROJECT_NUMBER = Version 3.5.8
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
ENABLE_PERMISSIVE_FLAG = -fpermissive
EXEEXT = 
F77 = gfortran
FFLAGS = -g -O2
FRAMEWORK_COREAUDIO = 
GMSGFMT = /usr/bin/msgfmt
GREP = /bin/grep
HAVE_GCC_VISIBILITY = 0
INSTALL = /usr/bin/install -c -p
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG)
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
KCFG_DEPENDENCIES = $(KCONFIG_COMPILER)
KCONFIG_COMPILER = /usr/bin/kconfig_compiler
KDECONFIG = /usr/bin/kde-config
KDE_CHECK_PLUGIN = $(KDE_PLUGIN) -rpath $(libdir)
KDE_EXTRA_RPATH = 
KDE_HAS_DOXYGEN = no
KDE_HAVE_DOT = NO
KDE_INCLUDES = -I/usr/include/kde
KDE_LDFLAGS = -L/usr/lib64
KDE_MT_LDFLAGS = 
KDE_MT_LIBS = -lpthread
KDE_NO_UNDEFINED = -Wl,--no-undefined -Wl,--allow-shlib-undefined
KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)
KDE_RPATH = -R $(libdir) -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)
KDE_USE_CLOSURE_FALSE = 
KDE_USE_CLOSURE_TRUE = #
KDE_USE_FINAL_FALSE = 
KDE_USE_FINAL_TRUE = #
KDE_USE_FPIE = -fPIE
KDE_USE_NMCHECK_FALSE = 
KDE_USE_NMCHECK_TRUE = #
KDE_USE_PIE = -pie
KDE_XSL_STYLESHEET = /usr/share/apps/ksgmltools2/customization/kde-chunk.xsl
LDFLAGS = 
LDFLAGS_AS_NEEDED = 
LDFLAGS_NEW_DTAGS = 
LIBCOMPAT = 
LIBCRYPT = -lcrypt
LIBDL = -ldl
LIBJPEG = -ljpeg
LIBOBJS = 
LIBPNG = -lpng -lz -lm
LIBPTHREAD = -lpthread
LIBRESOLV = -lresolv
LIBS = 
LIBSM = -lSM -lICE
LIBSOCKET = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool --silent
LIBUCB = 
LIBUTIL = -lutil
LIBZ = -lz
LIB_ARTS = -lartskde
LIB_KAB = -lkab
LIB_KABC = -lkabc
LIB_KDECORE = -lkdecore
LIB_KDED = 
LIB_KDEPIM = -lkdepim
LIB_KDEPRINT = -lkdeprint
LIB_KDEUI = -lkdeui
LIB_KDNSSD = -lkdnssd
LIB_KFILE = -lkio
LIB_KFM = 
LIB_KHTML = -lkhtml
LIB_KIMPROXY = -lkimproxy
LIB_KIO = -lkio
LIB_KJS = -lkjs
LIB_KNEWSTUFF = -lknewstuff
LIB_KPARTS = -lkparts
LIB_KSPELL = -lkspell
LIB_KSYCOCA = -lkio
LIB_KUNITTEST = -lkunittest
LIB_KUTILS = -lkutils
LIB_POLL = 
LIB_QPE = 
LIB_QT = -lqt-mt  $(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread
LIB_SMB = -lsmb
LIB_X11 = -lX11 $(LIBSOCKET)
LIB_XEXT = -lXext
LIB_XRENDER = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/michel/kile/test/office/admin/missing --run makeinfo
MAKEKDEWIDGETS = 
MCOPIDL = /usr/bin/mcopidl
MEINPROC = /usr/bin/meinproc
MKDIR_P = /bin/mkdir -p
MOC = /usr/lib64/qt-3.3/bin/moc
MSGFMT = /usr/bin/msgfmt
NOOPT_CFLAGS = -O0
NOOPT_CXXFLAGS = -O0
OBJEXT = o
PACKAGE = office
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
PERL = /usr/bin/perl
QTDOCDIR = NO
QTE_NORTTI = 
QT_INCLUDES = -I/usr/lib64/qt-3.3/include
QT_LDFLAGS = -L/usr/lib64/qt-3.3/lib
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TOPSUBDIRS =  datakiosk doc kile
UIC = /usr/lib64/qt-3.3/bin/uic -L $(kde_widgetdir) -nounload
UIC_TR = tr2i18n
USER_INCLUDES = 
USER_LDFLAGS = 
USE_EXCEPTIONS = -fexceptions
USE_RTTI = 
USE_THREADS = 
VERSION = 3.5.8
WOVERLOADED_VIRTUAL = 
XGETTEXT = /usr/bin/xgettext
XMKMF = 
XMLLINT = /usr/bin/xmllint
X_EXTRA_LIBS = 
X_INCLUDES = -I.
X_LDFLAGS = -L/usr/lib64
X_PRE_LIBS = 
X_RPATH = -R $(x_libraries)
abs_builddir = /home/michel/kile/test/office/kile/dist/build/kile-2.0/translations/ru/messages
abs_srcdir = /home/michel/kile/test/office/kile/dist/build/kile-2.0/translations/ru/messages
abs_top_builddir = /home/michel/kile/test/office
abs_top_srcdir = /home/michel/kile/test/office
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = gfortran
all_includes = -I/usr/include/kde -I/usr/lib64/qt-3.3/include -I. 
all_libraries = -L/usr/lib64/qt-3.3/lib -L/usr/lib64   
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/michel/kile/test/office/admin/install-sh
kde_appsdir = ${datadir}/applnk
kde_bindir = ${exec_prefix}/bin
kde_confdir = ${datadir}/config
kde_datadir = ${datadir}/apps
kde_htmldir = ${datadir}/doc/HTML
kde_icondir = ${datadir}/icons
kde_includes = /usr/include/kde
kde_kcfgdir = ${datadir}/config.kcfg
kde_libraries = /usr/lib64
kde_libs_htmldir = /usr/share/doc/HTML
kde_libs_prefix = /usr
kde_locale = ${datadir}/locale
kde_mimedir = ${datadir}/mimelnk
kde_moduledir = ${libdir}/kde3
kde_qtver = 3
kde_servicesdir = ${datadir}/services
kde_servicetypesdir = ${datadir}/servicetypes
kde_sounddir = ${datadir}/sounds
kde_styledir = ${libdir}/kde3/plugins/styles
kde_templatesdir = ${datadir}/templates
kde_wallpaperdir = ${datadir}/wallpapers
kde_widgetdir = /usr/lib64/kde3/plugins/designer
kdeinitdir = $(kde_moduledir)
libdir = ${exec_prefix}/lib64
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /home/michel/kile/test/office/test
program_transform_name = s,x,x,
psdir = ${docdir}
qt_includes = /usr/lib64/qt-3.3/include
qt_libraries = /usr/lib64/qt-3.3/lib
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_builddir = ../../../../../../..
top_srcdir = ../../../../../../..
x_includes = .
x_libraries = /usr/lib64
xdg_appsdir = ${datadir}/applications/kde
xdg_directorydir = ${datadir}/desktop-directories
xdg_menudir = ${sysconfdir}/xdg/menus
KDE_LANG = ru
#>- SUBDIRS = $(AUTODIRS)
#>+ 1
SUBDIRS =.
#>- POFILES = AUTO
#>+ 2
POFILES = kile.po
GMOFILES = kile.gmo
#>- all: all-recursive
#>+ 1
all: all-nls docs-am  all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
#>- 	@for dep in $?; do \
#>- 	  case '$(am__configure_deps)' in \
#>- 	    *$$dep*) \
#>- 	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
#>- 		&& exit 0; \
#>- 	      exit 1;; \
#>- 	  esac; \
#>- 	done; \
#>- 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile'; \
#>- 	cd $(top_srcdir) && \
#>- 	  $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile
#>+ 12
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile
	cd $(top_srcdir) && perl admin/am_edit kile/dist/build/kile-2.0/translations/ru/messages/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

#>- distdir: $(DISTFILES)
#>+ 1
distdir: distdir-nls  $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
#>- uninstall: uninstall-recursive
#>+ 1
uninstall: uninstall-nls  uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

#>- install-data-am:
#>+ 1
install-data-am: install-nls 

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

#>- maintainer-clean: maintainer-clean-recursive
#>+ 1
maintainer-clean: clean-nls  maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
KDE_DIST=kile.po Makefile.in Makefile.am 

#>+ 4
kile.gmo: kile.po
	rm -f kile.gmo; $(GMSGFMT) -o kile.gmo $(srcdir)/kile.po
	test ! -f kile.gmo || touch kile.gmo

#>+ 3
clean-nls:
	-rm -f  kile.gmo

#>+ 10
install-nls:
	$(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES
	@for base in kile ; do \
	  echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
	  if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
	  elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
	  fi ;\
	done


#>+ 3
uninstall-nls:
	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kile.mo

#>+ 2
all-nls: $(GMOFILES)

#>+ 8
distdir-nls:$(GMOFILES)
	for file in $(POFILES); do \
	  cp $(srcdir)/$$file $(distdir); \
	done
	for file in $(GMOFILES); do \
	  cp $(srcdir)/$$file $(distdir); \
	done

#>+ 2
docs-am:

#>+ 15
force-reedit:
		@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  kile/dist/build/kile-2.0/translations/ru/messages/Makefile
	cd $(top_srcdir) && perl admin/am_edit kile/dist/build/kile-2.0/translations/ru/messages/Makefile.in


#>+ 21
clean-bcheck: 
	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out

bcheck: bcheck-recursive

bcheck-am:
	@for i in ; do \
	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
	        echo "$$i"; \
	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \
	            rm -f $$i.bchecktest.cc; exit 1; \
	        fi ; \
	        echo "" >> $$i.bchecktest.cc.class; \
	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
	        rm -f a.out; \
	    fi ; \
	done


#>+ 3
final:
	$(MAKE) all-am

#>+ 3
final-install:
	$(MAKE) install-am

#>+ 3
no-final:
	$(MAKE) all-am

#>+ 3
no-final-install:
	$(MAKE) install-am

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo

#>+ 3
nmcheck: 
nmcheck-am: nmcheck
