Below is a HOWTO written by Nordom for a Gentoo installation
of the rt2400 driver. This is until someone creates an ebuild.

as root:
1. cd Module
2. make && make install
3. echo alias ra0 rt2400 > /etc/modules.d/rt2400
4. modules-update
5. cd /etc/init.d
6. ln -s net.eth0 net.ra0
7. Open /etc/conf.d/net with your favourite editor and add
line iface_ra0="... your config here ..." - everything is
explained by comments in this file
8. /etc/init.d/net.ra0 start
9. rc-update add net.ra0 default

