2008-02-22  Josep Torra Valles  <josep@fluendo.com>

	* configure.ac:
	Updated to compile with IPP version 5.3.1.062

2008-02-19  Kapil Agrawal <kapil@fluendo.com>

	* decoder/mp3tl.c: (mp3tl_sync):
	Fixed ticket #102.
	header and sync length were not considered while checking minimum 
	frame size.

2007-12-14  Julien Moutte <julien@fluendo.com>

	* gst-fluendo-mp3.spec.in: Handle SElinux policy in the RPM.

2007-08-23  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	Add IPP 5.2, 5.3 & 5.3_beta to the list of versions to check for.

	* decoder/mp3-ipp.c: (ipp_decode_mp3):
	Use memmove instead of memcpy, and only copy when there are actually
	bytes to move.

2007-08-13  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_src_event):
	* decoder/mp3-c-synth.c: (mp3_SubBandSynthesis):
	* decoder/mp3-c.c: (III_stereo):
	* decoder/mp3tl.c: (mp3tl_new):
	Fix some compiler warnings about unused variables.

2007-08-13  Josep Torra Valles  <josep@fluendo.com>

	* decoder/bitstream.c: (h_rewindNbits), (h_rewindNbytes):
	* decoder/bitstream.h:
	* decoder/mp3-c.c: (III_huffman_decode):
	Partial fix for ticket #18.
	Disabled the optimization until a complete fix. ENABLE_OPT_BS = 0. 

2007-07-26  Josep Torra Valles  <josep@fluendo.com>

	* configure.ac:
	* decoder/Makefile.am:
	* decoder/bitstream.c: (h_setbuf):
	* decoder/bitstream.h:
	* decoder/decode.c:
	* decoder/huffman.c: deleted
	* decoder/huffman.h: deleted
	* decoder/mp3-c.c: (huffman_decoder): made inline
	Several optimizations related to huffman decoding.

2007-07-26  Josep Torra Valles  <josep@fluendo.com>

	* decoder/mp3-c.c: (III_hybrid):
	Fixed a warning related to liboil.

2007-07-26  Josep Torra Valles  <josep@fluendo.com>

	* decoder/Makefile.am:
	Added table-powtable-2.h to fix 'make dist'.

2007-06-07  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_drain_avail):
	Don't output timestamps from an uninitialised variable
	when handling corrupted/skipped packets.

2007-06-06  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/common.h:
	Fix macro for marking unused function arguments.

	* decoder/mp3-c.c: (III_stereo):
	Guard against overflowing the arrays by limiting the subband
	iterator to 576.

2007-06-05  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	Add funrolling of the loops to the CFLAGS for a juicy speed boost.

	* decoder/decode.h:
	* decoder/mp3-c-synth.c: (mp3_SubBandSynthesis):
	* decoder/mp3-c.c: (III_get_scale_factors),
	(III_dequantize_sample), (inv_mdct_l), (inv_mdct), (III_hybrid),
	(c_decode_mp3):
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_decode_frame):
	Some fixes and optimisations, between that and funrolling loops,
	things are now 18% faster.

	* decoder/mp3-ipp.c: (decode_mp2), (ipp_decode_mp3),
	(mp3_SubBandSynthesis), (mp3_ipp_init), (mp3_ipp_flush),
	(mp3_ipp_close):
	Re-indent.

2007-06-01  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-c.c: (III_get_side_info), (III_dequantize_sample):
	* decoder/table-powtable-2.h:
	* decoder/table-powtable.h:
	* util/Makefile.am:
	* util/gen-pow-table-2.c: (main):
	Speed the C-only decoder up by 38% by pre-calculating some stuff
	instead of doing it over and over in an inner loop.

=== release 0.10.6 ===

2007-05-23  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-c-synth.c: (III_polyphase_matrix), (MPG_DCT_8):
	Use a temp array to turn 8 additions and 4 subtractions into 6
	additions and 2 subtractions.

	* decoder/mp3-c.c: (III_huffman_decode):
	Avoid a false assertion that occurs when we don't have any bigvalues
	or count1 bits to decode. Fixes #18.

2007-05-18  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_init), (flump3dec_reset),
	(flump3dec_flush), (flump3dec_sink_chain),
	(gst_flump3dec_update_ts), (flump3dec_drain_avail),
	(flump3dec_change_state):
	* decoder/flump3dec.h:
	* decoder/mp3tl.c: (mp3tl_decode_header):
	Fix timestamp handling so that incoming timestamps always get
	applied at the correct time. Add a threshold for accepting
	incoming timestamps - updates below the threshold are ignored,
	to avoid problems with the timestamping granularity of container
	formats.

2007-03-19  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	Make liboil use OFF by default. Enable it with --enable-liboil.

2007-03-12  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_src_query),
	(flump3dec_src_convert), (flump3dec_time_to_bytepos),
	(flump3dec_src_event):
	Don't convert all upstream seeks to open-ended ones. Preserve
	-1 as a valid value for seek start and end instead of converting
	it blindly to time and bytes.

2007-02-28  Thomas Vander Stichele  <thomas at apestaart dot org>

	* Makefile.am:
	* autogen.sh:
	* configure.ac:
	  adapt to new AG_GST and pull in new common common

2007-02-18  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/table-powtable.h:
	Oops, commit the power factors table too.

2007-02-18  Jan Schmidt  <thaytan@mad.scientist.com>

	* Makefile.am:
	* configure.ac:
	* decoder/Makefile.am:
	* decoder/bitstream.c: (bs_getbytes), (h_setbuf):
	* decoder/bitstream.h:
	* decoder/mp3-c-synth.c:
	* decoder/mp3-c.c: (III_get_side_info), (III_dequantize_sample),
	(c_decode_mp3), (mp3_c_init), (mp3_c_flush):
	* decoder/mp3-c.h:
	* decoder/mp3-ipp.c: (ipp_decode_mp3), (mp3_ipp_init),
	(mp3_ipp_flush), (mp3_ipp_close):
	* decoder/mp3-ipp.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_free),
	(mp3tl_decode_header), (mp3tl_decode_frame), (mp3tl_flush):
	Merge back pre-computed power factor table from the rework branch.
	Re-arrange the decoder backend so that the C implementation is always
	available, and use it for decoding "MPEG 2.5" even with IPP.

	Do more efficient bitstream operations by copying arrays of bytes 
	directly into the huffman bitstream instead of a byte at a time.

	Use the simpler 'huffman bitstream' object where we can.

	* util/Makefile.am:
	* util/gen-pow-table.c: (main):
	Utility for computing the power factor table.

2007-02-16  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	* decoder/Makefile.am:
	Add support for using liboil in the C build.

	* decoder/flump3dec.c: (flump3dec_base_init),
	(flump3dec_drain_avail):
	Change the reported codec tag string to 
	'MPEG 1/2 Audio, Layer 1/2/3' so it shows more info.
	Make the element details show which build (IPP,liboil,C) is in use.

	* decoder/mp3-c-synth.c: (mp3_SubBandSynthesis):
	* decoder/mp3-c.c: (inv_mdct_s), (mp3_init):
	* decoder/table-dewindow.h:
	Use liboil in one place to do an array multiply.

2007-02-13  Mathieu Garcia  <matthieu@fluendo.com>

	* decoder/flump3dec.c (flump3dec_drain_avail): Post less often
	the bitrate tag (> 10kbps change)

2007-02-12  Mathieu Garcia  <matthieu@fluendo.com>

	* decoder/flump3dec.c (flump3dec_change_state):
	(flump3dec_drain_avail):
	* decoder/flump3dec.h (struct FluMp3Dec):
	Now we post the bitrate tag.

	* decoder/flump3dec.c (flump3dec_drain_avail): Set the
	GST_TAG_AUDIO_CODEC.

	
2007-01-31 Christian Schaller <christian@fluendo.com>

	* decoder/flump3dec.c: Fix codec classification
	Audio/Decoder -> Codec/Decoder/Audio

=== release 0.10.5 ===

2006-12-12  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/common.h:
	* decoder/flump3dec.c: (flump3dec_get_query_types):
	* decoder/huffman.c:
	* decoder/mp3-c-synth.c: (mp3_SubBandSynthesis):
	* decoder/mp3-c.c: (III_get_side_info), (III_frequency_inversion),
	(mp3_close):
	* decoder/mp3tl-priv.h:
	Fix compilation on the Sun Studio compiler

=== release 0.10.4 ===

2006-11-28  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/bitstream.c: (bs_new):
	* decoder/decode.c: (set_hdr_data_slots):
	* decoder/mp3-c.c: (III_get_LSF_scale_factors),
	(III_huffman_decode), (III_dequantize_sample), (III_reorder),
	(III_stereo), (decode_mp3):
	  Implement MPEG-2.5 samplerates.

	* decoder/mp3tl.c: (mp3tl_decode_header):
	  Ignore the incoming table of frame sizes and pass all data including
	  possibly auxilliary bits to the decoder for now.

2006-11-21  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_init):
	Don't leak pad templates.

2006-11-20  Jan Schmidt  <thaytan@mad.scientist.com>

	Merge back revisions 601 thru 605 from the gst-fluendo-mp3-rework
	branch

2006-11-20  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-c-synth.c: (III_subband_synthesis),
	(mp3_SubBandSynthesis):
	Rearrange things slightly, so Layer 2 and Layer 3 decoding also use
	the new synthesis function.

2006-11-20  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/Makefile.am:
	* decoder/mp3-c-synth.c: (III_subband_synthesis),
	(III_polyphase_matrix), (MPG_DCT_32), (MPG_DCT_16), (MPG_DCT_8),
	(mp3_SubBandSynthesis):
	* decoder/mp3-c.c:
	* decoder/mp3-c.h:
	* decoder/mp3-cos-tables.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_decode_frame):
	Move synthesis/dct functions out to a separate file. Fix decoding by
	using the correct entry from the synth_cos64_table lookup table.

2006-11-20  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/Makefile.am:
	* decoder/mp3-c.c: (decode_mp3), (III_subband_synthesis),
	(III_polyphase_matrix), (MPG_DCT_32), (MPG_DCT_16), (MPG_DCT_8),
	(mp3_SubBandSynthesis):
	* decoder/mp3-cos-tables.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_decode_frame):
	Optimise polyphase filter bank by using a partially hand-unrolled
	32-point DCT.

2006-11-19  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/Makefile.am:
	* decoder/mp3-c.c: (inv_mdct), (init_mdct),
	(III_frequency_inversion), (decode_mp3), (mp3_init):
	Clean up old, slow code branches.

=== release 0.10.3 ===

2006-09-07  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_change_state):
	
	Patch from Sebastian Moutte to fix setting caps on the src pad
	when reusing the element (Closes #5)

2006-09-06  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/bitstream.h:
	* decoder/common.h:
	* decoder/decode.c: (II_dequant_and_scale_sample):
	* decoder/flump3dec.c: (flump3dec_get_type), (flump3dec_base_init),
	(flump3dec_check_for_xing), (flump3dec_drain_avail),
	(flump3dec_get_query_types):
	* decoder/huffman.c: (huffman_decoder):
	* decoder/mp3-c.c: (III_get_side_info), (III_get_scale_factors),
	(III_get_LSF_scale_data), (III_get_LSF_scale_factors),
	(III_huffman_decode), (III_dequantize_sample), (III_antialias),
	(decode_mp3), (mp3_SubBandSynthesis), (mp3_init), (mp3_flush),
	(mp3_close):
	* decoder/mp3-c.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_sync), (mp3tl_decode_frame):
	* decoder/table-huffdec.h:
	Clean ups and bug fixes. 

	Change the way the main_data buffer is calculate to eliminate a state
	variable.

	Fix a nasty array index overflow that was resulting in noise in the 
	left channel for some builds only.

	Fix all -Wextra warnings

2006-08-25  Wim Taymans  <wim@fluendo.com>

	* decoder/flump3dec.c: (flump3dec_drain_avail),
	(flump3dec_sink_event):
	Output the first frame before the second frame instead at EOS.

2006-08-18  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	  Build against IPP for x86_64, and support IPP 5.0 & 5.1

	* decoder/mp3-c.c: (mp3_SubBandSynthesis):
	  Fix the float -> int16 conversion so it doesn't overflow

=== release 0.10.2 ====

2006-04-06  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-ipp.c: (mp3_SubBandSynthesis):
	Fix unused variable warning

=== release 0.10.1 ===

2006-02-08  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	  Bump to 0.10.1
	* decoder/flump3dec.c: (flump3dec_check_for_xing),
	(flump3dec_drain_avail):
	Also recognise LAME Info header for Xing data

2006-02-01  Andy Wingo  <wingo@pobox.com>

	* decoder/decode.c (out_fifo): pcm_sample[][][] is already in
	native endianness, no need to convert. Fixes playback on PPC.

	* configure.ac (GST_ERROR): AC_SUBST this so the makefiles pick it
	up. Turns on -Wall/-Werror.

	* decoder/flump3dec.c (flump3dec_total_time) 
	(flump3dec_total_bytes): "control reaches end of non-void
	function"

	* decoder/decode.c (II_buffer_sample): 
	* decoder/mp3tl.c (mp3tl_decode_frame): 
	* decoder/flump3dec.c (flump3dec_total_time):
	"unused variables"

=== release 0.10.0 ===

2005-12-21  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/decode.c: (read_header):
	  Remove bogus comment 
	* decoder/mp3-c.c: (III_huffman_decode), (III_dequantize_sample),
	(III_reorder), (III_stereo):
	  Fix incorrect usage of the hdr version value - it now takes 4
	  values to recognise MPEG-2.5, instead of a single bit.

2005-12-21  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-c.c: (III_get_side_info), (III_stereo), (decode_mp3):
	  Replace remaining MPEG_PHASE2_LSF uses

2005-12-20  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/bitstream.c: (bs_nextbuf), (bs_seek_sync):
	* decoder/bitstream.h:
	  Rewrite sync function to recognise MPEG 2.5 unofficial sync
	  sequences, and to be more efficient.

	* decoder/common.c: (II_pick_table):
	* decoder/common.h:
	* decoder/decode.c: (read_header), (set_hdr_data_slots):
	* decoder/flump3dec.c: (flump3dec_check_for_xing),
	(flump3dec_drain_avail), (flump3dec_src_query),
	(flump3dec_src_convert), (flump3dec_src_event):
	* decoder/mp3-ipp.c: (decode_mp3):
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_sync), (mp3tl_decode_header),
	(mp3tl_decode_frame), (mp3tl_skip_frame), (mp3tl_get_err_reason):
	* decoder/mp3tl.h:
	  Recognise MPEG 2.5 streams and report that they're currently not
	  supported.
	  Implement skip function that tracks timestamps etc when not
	  decoding unwanted output audio.
	  Cleanups, more debug output
	  Use gst_pad_get_parent in query and seek handling functions.

2005-12-09  Jan Schmidt  <thaytan@mad.scientist.com>

	* COPYING:
	Mention Intel copyright on some files.

	* TODO:
	Remove todo item
	* decoder/bitstream.c:
	* decoder/bitstream.h:
	* decoder/common.c:
	* decoder/common.h:
	* decoder/decode.c:
	* decoder/decode.h:
	* decoder/huffman.c:
	* decoder/huffman.h:
	* decoder/mp3-c.c:
	* decoder/mp3-c.h:
	* decoder/mp3tl.c:
	* decoder/table-bitalloc.h:
	* decoder/table-dewindow.h:
	* decoder/table-huffdec.h:
	Add copyright header to all files

2005-12-09  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-ipp.c:
	* decoder/mp3-ipp.h:
	Add Intel copyright header to IPP sample code

2005-12-09  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_sink_chain),
	(flump3dec_check_for_xing), (flump3dec_drain_avail),
	(flump3dec_change_state), (flump3_inbytes_to_time),
	(flump3dec_total_bytes), (flump3dec_total_time),
	(flump3dec_src_query), (flump3dec_src_convert),
	(flump3dec_src_event):
	* decoder/flump3dec.h:
	* decoder/mp3-ipp.c: (decode_mp3):
	* decoder/mp3tl.c: (mp3tl_sync):
	Implement Xing header handling

=== release 0.9.7 ===

2005-12-02  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	Bump for release

2005-12-02  Julien MOUTTE  <julien@moutte.net>

	* configure.ac: Switch to 0.10.

2005-11-28  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-c.c: (III_dequantize_sample), (III_reorder),
	(III_i_stereo_k_values), (III_stereo), (III_antialias),
	(inv_mdct_s), (inv_mdct_l), (imdct_9pt), (inv_mdct), (III_hybrid),
	(decode_mp3):
	Fix compilation without IPP. Use gfloats instead of gdoubles 
	everywhere like the reference code used to.

2005-11-23  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flump3dec.c: (flump3dec_sink_event):
	  No need to take the stream lock any more for serialised
	  events

2005-11-18  Thomas Vander Stichele  <thomas at apestaart dot org>

	* configure.ac:
	  back to TRUNK

=== release 0.9.5 ===

2005-11-14  Thomas Vander Stichele  <thomas at apestaart dot org>

	* configure.ac:
	  releasing 0.9.5, works with GStreamer 0.9.5

2005-11-10  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/mp3-ipp.c: (mp3_SubBandSynthesis):
	  Remove excess debug.

	* decoder/Makefile.am:
	* decoder/table-dewindow-ipp.h:
	  Add new file for IPP dewindowing

2005-11-10  Jan Schmidt  <thaytan@mad.scientist.com>

	* configure.ac:
	  Update library list
	* decoder/common.c: (II_pick_table), (hdr_to_frps):
	* decoder/common.h:
	* decoder/decode.c: (II_decode_bitalloc), (II_decode_scale),
	(I_buffer_sample), (II_buffer_sample),
	(II_dequant_and_scale_sample), (I_dequant_and_scale_sample),
	(init_syn_filter):
	* decoder/decode.h:
	* decoder/flump3dec.c: (flump3dec_init), (flump3dec_flush),
	(flump3dec_sink_chain), (flump3dec_drain_avail),
	(flump3dec_sink_event), (flump3_inbytes_to_time):
	* decoder/flump3dec.h:
	* decoder/mp3-c.c: (decode_mp3), (mp3_SubBandSynthesis),
	(mp3_init), (mp3_close):
	* decoder/mp3-ipp.c: (decode_mp2), (mp3_SubBandSynthesis),
	(mp3_init), (mp3_close):
	* decoder/mp3-ipp.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_free), (mp3tl_sync),
	(mp3tl_decode_frame):
	  Speed improvements for layer 1 and 2 decoding.
	  Detection of bad CRC
	  Recover a bad frame by duplicating the previous frame.
	  New-segment fix.
	  Output the final frame on EOS.
	  
	* TODO:
          Update todos

2005-10-27  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Package name fixed

2005-10-27  Edward Hervey <edward@fluendo.com>

	* decoder/decode.c:
	Remove valgrind #include
	* autogen.sh:
	* configure.ac:
	Updated to use standard gst-autogen.sh
	* common/:
	* common/m4/:
	Updated to gstreamer common

2005-10-18  Wim Taymans  <wim@fluendo.com>

	* decoder/flump3dec.c: 
	We use fixed caps.

2005-10-12  Julien MOUTTE  <julien@moutte.net>

	* decoder/flump3dec.c: (flump3dec_sink_event): Fix for newsegment
	API changes.

2005-10-04  Thomas Vander Stichele  <thomas at apestaart dot org>

	* configure.ac:
	  releasing 0.1.3, works with GStreamer 0.9.3

2005-08-30  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flmp3dec.c: (flmp3dec_drain_avail):
	  OK - this time for sure :)

2005-08-30  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/bitstream.c: (bs_seek_sync):
	* decoder/flmp3dec.c: (flmp3dec_sink_chain):
	  Fixes for timestamp handling. Hopefully correct now.

2005-08-30  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/Makefile.am:
	  Rename plugin library to flump3.

	* decoder/bitstream.c: (bs_add_buffer), (bs_seek_sync),
	(bs_buf_time):
	* decoder/bitstream.h:
	* decoder/flmp3dec.c: (flmp3dec_base_init), (flmp3dec_init),
	(flmp3dec_flush), (flmp3dec_sink_chain), (flmp3dec_drain_avail):
	* decoder/flmp3dec.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_sync), (mp3tl_decode_frame),
	(mp3tl_flush):
	* decoder/mp3tl.h:
	  Add code to handle incoming timestamps as the timestamp of the frame
	  for the first sync word contained in the buffer, as per mpeg PTS.

2005-08-11  Jan Schmidt  <thaytan@mad.scientist.com>
	* decoder/decode.c: (set_hdr_data_slots):
	  Fix slot calculations for LSF mpeg audio.

	* decoder/flmp3dec.c: (flmp3dec_sink_chain), (flmp3dec_sink_event):
	  Change timestamp handling. Only trust upstream timestamps if we
	  don't have one of our own.

	* decoder/mp3-ipp.c: (decode_mp3):
	  Remove debug

2005-08-09  Jan Schmidt  <thaytan@mad.scientist.com>
	* configure.ac:
	  Fiddle with IPP detection bits. By default, use IPP if found in
	  /opt/intel/ipp, or with --with-ipp-path=/foo/bar

	* decoder/bitstream.c: (bs_seek_sync):
	* decoder/bitstream.h:
	  Fix irritating bug when skipping over bits that ate 1 byte too much.

	* decoder/common.h:
	* decoder/decode.c: (set_hdr_data_slots), (recover_CRC_error):
	* decoder/decode.h:
	* decoder/mp3-c.h:
	* decoder/mp3-c.c: (III_get_side_info), (III_get_scale_factors),
	(III_get_LSF_scale_data), (III_get_LSF_scale_factors),
	(III_huffman_decode), (III_dequantize_sample), (III_reorder),
	(III_i_stereo_k_values), (III_stereo), (III_antialias),
	(inv_mdct_s), (inv_mdct_l), (imdct_9pt), (inv_mdct), (init_hybrid),
	(III_hybrid), (decode_mp3), (mp3_init), (mp3_flush):
	* decoder/mp3-ipp.c: (decode_mp3), (mp3_init), (mp3_flush):
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_sync), (mp3tl_decode_frame),
	(mp3tl_flush):
	  Better resync algorithm for location frame synchronisation point.
	  Shift a bunch of C-implementation only stuff into mp3-c.c and
	  mp3-c.h to make the code cleaner.

2005-08-08  Christian Schaller <christian@fluendo.com>
	* Add result message for IPP

2005-08-04  Jan Schmidt  <thaytan@mad.scientist.com>
	* configure.ac:
	* decoder/Makefile.am:
	  Rearrange detection of IPP slightly, and add extra libraries

	* decoder/common.h:
	* decoder/decode.c: (set_hdr_data_slots):
	* decoder/decode.h:
	* decoder/mp3-ipp.c: (decode_mp3):
	* decoder/mp3-ipp.h:
	* decoder/mp3tl-priv.h:
	* decoder/mp3tl.c: (mp3tl_sync), (mp3tl_decode_header),
	(mp3tl_decode_frame):
	  Merge in IPP branch. Can now selectively build IPP version or C only

2005-08-3   Christian Schaller <christian@fluendo.com>

	* configure.in: add check for IPP
	* decoder/Makefile.am: add ipp stuff

2005-07-29  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/common.h:
	* decoder/decode.c: (III_get_side_info), (III_get_scale_factors),
	(III_get_LSF_scale_data), (III_get_LSF_scale_factors),
	(III_huffman_decode), (III_dequantize_sample):
	* decoder/mp3tl.c: (mp3tl_decode_frame):
          Clean up some of the code a bit for readability.
	  
	* decoder/flmp3dec.c: (flmp3dec_sink_event), (flmp3dec_src_event):
	  Update for new events API.

2005-07-15  Jan Schmidt  <thaytan@mad.scientist.com>

	* test/layer3/:
	Add mp3 compliance test files.

2005-07-15  Jan Schmidt  <thaytan@mad.scientist.com>
	* TODO:
	* decoder/common.h:
	* decoder/decode.c: (III_get_scale_factors),
	(III_get_LSF_scale_data), (III_get_LSF_scale_factors),
	(III_huffman_decode), (III_dequantize_sample), (III_reorder),
	(III_stereo), (III_antialias), (inv_mdct_s), (inv_mdct_l),
	(imdct_9pt), (inv_mdct), (III_hybrid):
	* decoder/decoder.h:
	* decoder/huffman.c: (huffman_decoder):
	Profiling and optimisation of IMDCT. Valgrind fixes.

	* decoder/flmp3dec.c: (flmp3dec_init), (flmp3dec_sink_chain),
	(flmp3dec_sink_event), (flmp3dec_src_query), (flmp3dec_src_event):
	* decoder/flmp3dec.h:
	* decoder/mp3tl.c: (mp3tl_sync), (mp3tl_decode_frame),
	(mp3tl_flush):
	Better re-synchronisation and bad-frame handling. 
	Seeking/querying fixes.

2005-07-08  Christian Schaller <christian@fluendo.com>

	* Add SPEC file for RPM building
	* Update COPYING file to use MIT license
	* Add COPYING_statement which clarifies some issues around the MIT license

2005-06-14  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/flmp3dec.c: (flmp3dec_sink_chain), (flmp3dec_sink_event),
	(flmp3_inbytes_to_time), (flmp3dec_src_query),
	(flmp3dec_src_event):
	* decoder/mp3tl.c: (mp3tl_decode_frame):
	  Seeking changes. Some temporary debug output. Fixes for API
	  changes.

2005-06-01  Jan Schmidt  <thaytan@mad.scientist.com>

	* decoder/bitstream.c: (bs_new), (bs_free), (bs_flush), (bs_add_buffer),
	(bs_reset), (bs_eat), (bs_consume), (bs_skipbits), (bs_nextbuf),
	(bs_seek_sync):
	* decoder/bitstream.h:
	* decoder/common.h:
	* decoder/decode.c: (read_header), (main_data_slots),
	(III_get_side_info), (III_get_LSF_scale_data),
	(III_get_LSF_scale_factors), (III_huffman_decode),
	(III_dequantize_sample), (III_reorder), (III_i_stereo_k_values),
	(III_stereo), (III_antialias), (inv_mdct):
	* decoder/decoder.h:
	* decoder/flmp3dec.c: (flmp3dec_sink_chain), (flmp3dec_sink_event),
	(flmp3dec_src_query):
	* decoder/huffman.c:
	* decoder/mp3tl.c: (mp3tl_new), (mp3tl_sync), (mp3tl_decode_header),
	(mp3tl_decode_frame), (mp3tl_flush):
	* decoder/mp3tl.h:
	* decoder/table-bitalloc.h:
	* decoder/table-dewindow.h:

	Refactor the bitstream reader so we can peek ahead, allowing better
	resynching after a seek. Sometimes seeking works now.
	Remove a few static variables I missed.

2005-05-29  Jan Schmidt  <thaytan@mad.scientist.com>

	* TODO:
	* decoder/Makefile.am:
	* decoder/bitstream.c: (bs_new), (bs_free), (bs_flush),
	(bs_set_release_func), (bs_add_buffer), (bs_nextbuf),
	(bs_seek_sync), (h_init), (h_flush), (h_rewindNbits),
	(h_rewindNbytes):
	* decoder/bitstream.h:
	* decoder/common.c:
	* decoder/common.h:
	* decoder/flmp3dec.c: (flmp3dec_init), (flmp3dec_flush),
	(flmp3dec_sink_chain), (flmp3dec_sink_event),
	(flmp3dec_change_state), (flmp3dec_get_query_types),
	(flmp3dec_src_query), (flmp3dec_src_convert), (flmp3dec_src_event):
	* decoder/flmp3dec.h:
	* decoder/mp3tl.c: (mp3tl_decode_frame), (mp3tl_flush):
	* decoder/mp3tl.h:
	  Move bitstream handling into its own file.

	  Bitrate tracking, querying and seek handling. Currently doesn't
	  resync after a seek though.

2005-05-26  Jan Schmidt  <thaytan@mad.scientist.com>
  Initial commit
