#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --without-omega            don't compile and install Omega"
ac_help="$ac_help
  --without-pdftex           don't compile and install pdfTeX"
ac_help="$ac_help
  --without-pdfetex          don't compile and install pdfeTeX"
ac_help="$ac_help
  --with-etex=ETEX           ETEX=no  don't compile and install e-TeX
                             ETEX=tex install e-TeX as tex"
ac_help="$ac_help
  --with-editor=CMD       invoke CMD from the e option [vi +%d %s]"
ac_help="$ac_help
  --enable-ipc            enable TeX's --ipc option, i.e., pipe to a program"
ac_help="$ac_help
  --enable-auto-core      cause TeX&MF to dump core given a certain filename"
ac_help="$ac_help
  --disable-dump-share    make fmt/base/mem files architecture-dependent"
ac_help="$ac_help
  --with-mfw=MFW             MFW=yes  window-capable METAFONT is mfw
                             MFW=mf   window-capable METAFONT is mf
                             MFW=no   no window-capable METAFONT"
ac_help="$ac_help
  --with-epsfwin          include EPSF pseudo-window support"
ac_help="$ac_help
  --with-hp2627win        include HP 2627 window support in Metafont"
ac_help="$ac_help
  --with-mftalkwin        include mftalk (generic server) window support"
ac_help="$ac_help
  --with-nextwin          include NeXT window support"
ac_help="$ac_help
  --with-regiswin         include Regis window support"
ac_help="$ac_help
  --with-suntoolswin      include old Suntools window support (this is not X)"
ac_help="$ac_help
  --with-tektronixwin     include Tektronix window support"
ac_help="$ac_help
  --with-unitermwin       include Uniterm window support"
ac_help="$ac_help
  --with-x-toolkit=KIT    use a toolkit (KIT=no/yes/xt/athena)"
ac_help="$ac_help
  --with-x11win           same as --with-x"
ac_help="$ac_help
  --with-x11              same as --with-x"
ac_help="$ac_help
  --enable-maintainer-mode enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
ac_help="$ac_help
  --without-mktexmf-default    do not run mktexmf if MF source missing"
ac_help="$ac_help
  --without-mktexpk-default    do not run mktexpk if PK font missing"
ac_help="$ac_help
  --without-mktextfm-default   do not run mktextfm if TFM file missing"
ac_help="$ac_help
  --without-mkocp-default      do not run mkocp if OCP file missing"
ac_help="$ac_help
  --without-mkofm-default      do not run mkofm if OFM file missing"
ac_help="$ac_help
  --with-mktextex-default      run mktextex if TeX source missing"
ac_help="$ac_help
  --enable-multiplatform     put executables in bin/PLATFORM"
ac_help="$ac_help
  --enable-local-texmf=DIR        set local texmf tree to DIR"
ac_help="$ac_help
  --with-x                use the X Window System"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=multex.ch

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



WEB2CVERSION=7.3.1

cat >> confdefs.h <<EOF
#define WEB2CVERSION " (Web2C $WEB2CVERSION)"
EOF




# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:602: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:633: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:685: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:718: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 729 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:760: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:765: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:774: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:793: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    case $ac_dir in
      /*|[A-z]:/*) ac_aux_dir=$ac_dir;;
      *)  ac_aux_dir=`pwd`/$ac_dir;;
    esac
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    case $ac_dir in
      /*|[A-z]:/*) ac_aux_dir=$ac_dir;;
      *)  ac_aux_dir=`pwd`/$ac_dir;;
    esac
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:861: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  # Hack for MSDOS and descendants.
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test $ac_x $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:916: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
# MS-DOS is a special case, because it sort of pretends that ln -s
# works for executables.
if test -z "$COMSPEC" && ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:939: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


for ac_prog in 'bison -y' byacc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:971: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$YACC"; then
  ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_YACC="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
YACC="$ac_cv_prog_YACC"
if test -n "$YACC"; then
  echo "$ac_t""$YACC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$YACC" && break
done
test -n "$YACC" || YACC="yacc"

# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1005: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$LEX"; then
  ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_LEX="flex"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
fi
fi
LEX="$ac_cv_prog_LEX"
if test -n "$LEX"; then
  echo "$ac_t""$LEX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$LEXLIB"
then
  case "$LEX" in
  flex*) ac_lib=fl ;;
  *) ac_lib=l ;;
  esac
  echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
echo "configure:1040: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1048 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char yywrap();

int main() {
yywrap()
; return 0; }
EOF
if { (eval echo configure:1059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LEXLIB="-l$ac_lib"
else
  echo "$ac_t""no" 1>&6
fi

fi

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

for ac_func in strerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1115: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1120 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:1143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:1169: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1174 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:1191: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_type_signal=void
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_type_signal=int
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF



echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1211: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1226 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1232: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1243 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1260 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1266: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

echo $ac_n "checking lex output file root""... $ac_c" 1>&6
echo "configure:1291: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # The minimal lex program is just a single line: %%.  But some broken lexes
# (Solaris, I think it was) want two %% lines, so accommodate them.
echo '%%
%%' | $LEX
if test -f lex.yy.c; then
  ac_cv_prog_lex_root=lex.yy
elif test -f lexyy.c; then
  ac_cv_prog_lex_root=lexyy
else
  { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
fi
fi

echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
rm -f "${LEX_OUTPUT_ROOT}.c"

echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
echo "configure:1313: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # POSIX says lex can declare yytext either as a pointer or an array; the
# default is implementation-dependent. Figure out which it is, since
# not all implementations provide the %pointer and %array declarations.
ac_cv_prog_lex_yytext_pointer=no
# Avoid need for the lex library; very commonly, -lfl won't be found by
# default, and thus the link below would fail if we didn't supply yywrap,
# which would fool configure into thinking that yytext was not
# a char * when it really is.
echo '%%
%%' | $LEX
echo "extern char *yytext;
#ifndef yywrap
int yywrap () { return 1; }
#endif" >>$LEX_OUTPUT_ROOT.c
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
#line 1334 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {

; return 0; }
EOF
if { (eval echo configure:1341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_prog_lex_yytext_pointer=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
rm -f "${LEX_OUTPUT_ROOT}.c"

fi

echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
if test $ac_cv_prog_lex_yytext_pointer = yes; then
  cat >> confdefs.h <<\EOF
#define YYTEXT_POINTER 1
EOF

else
echo $ac_n "checking whether yytext is an array of char""... $ac_c" 1>&6
echo "configure:1362: checking whether yytext is an array of char" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # POSIX says lex can declare yytext either as a pointer or an array; the
# default is implementation-dependent. Figure out which it is, since
# not all implementations provide the %pointer and %array declarations.
ac_cv_prog_lex_yytext_char=no
# Avoid need for the lex library; very commonly, -lfl won't be found by
# default, and thus the link below would fail if we didn't supply yywrap,
# which would fool configure into thinking that yytext was not
# a char array when it really is.

echo '%%
%%' | $LEX
echo "extern char yytext[];
#ifndef yywrap
int yywrap () { return 1; }
#endif" >>$LEX_OUTPUT_ROOT.c

ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
#line 1385 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {

; return 0; }
EOF
if { (eval echo configure:1392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_prog_lex_yytext_char=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
rm -f "${LEX_OUTPUT_ROOT}.c"

fi

echo "$ac_t""$ac_cv_prog_lex_yytext_char" 1>&6
if test $ac_cv_prog_lex_yytext_char = yes; then
cat >> confdefs.h <<\EOF
#define YYTEXT_CHAR 1
EOF

else
echo $ac_n "checking whether yytext is an array of unsigned char""... $ac_c" 1>&6
echo "configure:1413: checking whether yytext is an array of unsigned char" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_uchar'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # Some systems use an array of unsigned char for yytext.  Figure out if that
# happens to be the case.
ac_cv_prog_lex_yytext_uchar=no
# Avoid need for the lex library; very commonly, -lfl won't be found by
# default, and thus the link below would fail if we didn't supply yywrap,
# which would fool configure into thinking that yytext was not
# a unsigned char array when it really is.

echo '%%
%%' | $LEX
echo "extern unsigned char yytext[];
#ifndef yywrap
int yywrap () { return 1; }
#endif" >>$LEX_OUTPUT_ROOT.c

ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
#line 1435 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {

; return 0; }
EOF
if { (eval echo configure:1442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_prog_lex_yytext_uchar=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
rm -f "${LEX_OUTPUT_ROOT}.c"

fi

echo "$ac_t""$ac_cv_prog_lex_yytext_uchar" 1>&6
if test $ac_cv_prog_lex_yytext_uchar = yes; then
cat >> confdefs.h <<\EOF
#define YYTEXT_UCHAR 1
EOF

fi
fi
fi

echo $ac_n "checking whether gcc asm needs underscore""... $ac_c" 1>&6
echo "configure:1466: checking whether gcc asm needs underscore" >&5
if eval "test \"`echo '$''{'pb_cv_asm_underscore'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
# Older versions of GCC asm for i386 need an underscore prepended to
# external symbols. Figure out if this is so.
pb_cv_asm_underscore=yes
cat > conftest.$ac_ext <<EOF
#line 1475 "configure"
#include "confdefs.h"

extern char val ;
extern void sub () ;
#if defined (__i386__) && defined (__GNUC__) 
asm("        .align 4\n"
".globl sub\n"
"sub:\n"
"        movb \$1,val\n"
"        ret\n");
#else
void sub () { val = 1; }
#endif /* assembler */
char val ;

int main() {
sub
; return 0; }
EOF
if { (eval echo configure:1495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  pb_cv_asm_underscore=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
fi

echo "$ac_t""$pb_cv_asm_underscore" 1>&6
if test "x$pb_cv_asm_underscore" = xyes; then
  cat >> confdefs.h <<\EOF
#define ASM_NEEDS_UNDERSCORE 1
EOF

fi


echo $ac_n "checking for loader (symbol LD)""... $ac_c" 1>&6
echo "configure:1515: checking for loader (symbol LD)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$LD" && LD=ld
cf_cv_subst_LD=$LD
fi

LD=${cf_cv_subst_LD}
echo "$ac_t""$LD" 1>&6


echo $ac_n "checking for archiver (symbol AR)""... $ac_c" 1>&6
echo "configure:1529: checking for archiver (symbol AR)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_AR'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$AR" && AR=ar
cf_cv_subst_AR=$AR
fi

AR=${cf_cv_subst_AR}
echo "$ac_t""$AR" 1>&6


echo $ac_n "checking for archiver options (symbol ARFLAGS)""... $ac_c" 1>&6
echo "configure:1543: checking for archiver options (symbol ARFLAGS)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_ARFLAGS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$ARFLAGS" && ARFLAGS=rc
cf_cv_subst_ARFLAGS=$ARFLAGS
fi

ARFLAGS=${cf_cv_subst_ARFLAGS}
echo "$ac_t""$ARFLAGS" 1>&6



# Needed on A/UX 3.0. I don't want to pull in other -lposix's, though.
# From: bernt@weinberg.pop.bio.aau.dk (Bernt Guldbrandtsen)
if test `(uname) 2>/dev/null` = aux; then
  echo $ac_n "checking for sigemptyset in -lposix""... $ac_c" 1>&6
echo "configure:1561: checking for sigemptyset in -lposix" >&5
ac_lib_var=`echo posix'_'sigemptyset | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1569 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sigemptyset();

int main() {
sigemptyset()
; return 0; }
EOF
if { (eval echo configure:1580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo posix | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lposix $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

fi






ZZ=
if test "$cross_compiling" = yes &&
   test "x$CC" = "xdos-gcc"; then
ZZ=dos-gcc
unset CC
cross_compiling=no
fi

echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
echo "configure:1623: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$GCC" = yes; then
  # GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
#line 1630 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
  yes
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "yes" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_c_char_unsigned=yes
else
  rm -rf conftest*
  ac_cv_c_char_unsigned=no
fi
rm -f conftest*

else
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 1652 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs.  */
#if !defined(__STDC__) || __STDC__ != 1
#define volatile
#endif
main() {
  volatile char c = 255; exit(c < 0);
}
EOF
if { (eval echo configure:1662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_char_unsigned=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_char_unsigned=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_char_unsigned" 1>&6
if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then
  cat >> confdefs.h <<\EOF
#define __CHAR_UNSIGNED__ 1
EOF

fi

echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:1686: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 1693 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:1704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 1708 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:1719: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_bigendian=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_bigendian=no
fi
rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 1739 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:1752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_bigendian=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
  cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF

fi

echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:1776: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 1784 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long));
  exit(0);
}
EOF
if { (eval echo configure:1795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF



if test "x$ZZ" = "xdos-gcc"; then
CC=dos-gcc
cross_compiling=yes
fi


# --with and --enable options.
test "x$with_x_toolkit" = xyes && with_x=yes
test "x$with_x_toolkit" = xxt && with_x=yes
test "x$with_x_toolkit" = xathena && with_x=yes
test "x$with_x" = xno && with_x_toolkit=no

: ${with_x=no} # tell PATH_XTRA no X by default, if not specified.



# Check whether --with-omega or --without-omega was given.
if test "${with_omega+set}" = set; then
  withval="$with_omega"
  :
fi


# Check whether --with-pdftex or --without-pdftex was given.
if test "${with_pdftex+set}" = set; then
  withval="$with_pdftex"
  :
fi


# Check whether --with-pdfetex or --without-pdfetex was given.
if test "${with_pdfetex+set}" = set; then
  withval="$with_pdfetex"
  :
fi


# Check whether --with-etex or --without-etex was given.
if test "${with_etex+set}" = set; then
  withval="$with_etex"
  :
fi


# Check whether --with-editor or --without-editor was given.
if test "${with_editor+set}" = set; then
  withval="$with_editor"
    cat >> confdefs.h <<EOF
#define EDITOR "$with_editor"
EOF


fi


# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
  enableval="$enable_ipc"
  cat >> confdefs.h <<\EOF
#define IPC 1
EOF

  # -lsocket is needed on Solaris, at least.  Maybe -lnsl on SCO, too?
  # See ac_path_xtra.
  echo $ac_n "checking for connect""... $ac_c" 1>&6
echo "configure:1880: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1885 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char connect(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
connect();
#endif

; return 0; }
EOF
if { (eval echo configure:1908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_connect=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_connect=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

  if test x$ac_cv_func_connect = xno; then
    echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:1929: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1937 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:1948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  socketlibs="-lsocket $socketlibs"
else
  echo "$ac_t""no" 1>&6
fi

  fi

fi



# Check whether --enable-auto-core or --disable-auto-core was given.
if test "${enable_auto_core+set}" = set; then
  enableval="$enable_auto_core"
  cat >> confdefs.h <<\EOF
#define FUNNY_CORE_DUMP 1
EOF

fi


# Check whether --enable-dump-share or --disable-dump-share was given.
if test "${enable_dump_share+set}" = set; then
  enableval="$enable_dump_share"
  if test "x$enableval" = xno; then
  cat >> confdefs.h <<\EOF
#define NO_DUMP_SHARE 1
EOF

fi

fi



# Check whether --with-mfw or --without-mfw was given.
if test "${with_mfw+set}" = set; then
  withval="$with_mfw"
  :
fi


# Window system support for Metafont.
# Check whether --with-epsfwin or --without-epsfwin was given.
if test "${with_epsfwin+set}" = set; then
  withval="$with_epsfwin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define EPSFWIN 1
EOF

fi

fi

# Check whether --with-hp2627win or --without-hp2627win was given.
if test "${with_hp2627win+set}" = set; then
  withval="$with_hp2627win"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define HP2627WIN 1
EOF

fi

fi

# Check whether --with-mftalkwin or --without-mftalkwin was given.
if test "${with_mftalkwin+set}" = set; then
  withval="$with_mftalkwin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define MFTALKWIN 1
EOF

fi

fi

# Check whether --with-nextwin or --without-nextwin was given.
if test "${with_nextwin+set}" = set; then
  withval="$with_nextwin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define NEXTWIN 1
EOF

fi

fi

# Check whether --with-regiswin or --without-regiswin was given.
if test "${with_regiswin+set}" = set; then
  withval="$with_regiswin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define REGISWIN 1
EOF

fi

fi

# Check whether --with-suntoolswin or --without-suntoolswin was given.
if test "${with_suntoolswin+set}" = set; then
  withval="$with_suntoolswin"
  if test "x$withval" = xyes; then
  wlibs="-lsuntool -lsunwindow -lpixrect $wlibs"
  cat >> confdefs.h <<\EOF
#define SUNWIN 1
EOF

fi

fi

# Check whether --with-tektronixwin or --without-tektronixwin was given.
if test "${with_tektronixwin+set}" = set; then
  withval="$with_tektronixwin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define TEKTRONIXWIN 1
EOF

fi

fi

# Check whether --with-unitermwin or --without-unitermwin was given.
if test "${with_unitermwin+set}" = set; then
  withval="$with_unitermwin"
  if test "x$withval" = xyes; then
  cat >> confdefs.h <<\EOF
#define UNITERMWIN 1
EOF

fi

fi



# This defines --with-x implicitly (which is why we use that package
# name below), so put it here, so it comes first in the --help output.
# This reads best.

# Remember to add AC_PATH_XTRA when actually using X.

# Check whether --with-x-toolkit or --without-x-toolkit was given.
if test "${with_x_toolkit+set}" = set; then
  withval="$with_x_toolkit"
  	  case "${withval}" in
	    y | ye | yes )	val=yes ;;
	    x | xt )		val=xt  ;;
	    n | no )		val=no  ;;
	    a | at | ath | athe | athena ) val=athena ;;
	    * )
echo "configure: warning: unknown --with-x-toolkit argument \`$withval'; using yes." 1>&2
              val=yes;;
	  esac
	  with_x_toolkit=$val

fi



# Check whether --with-x11win or --without-x11win was given.
if test "${with_x11win+set}" = set; then
  withval="$with_x11win"
  with_x="$withval"
fi

# Check whether --with-x11 or --without-x11 was given.
if test "${with_x11+set}" = set; then
  withval="$with_x11"
  with_x="$withval"
fi



echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:2144: checking whether to enable maintainer-specific portions of Makefiles" >&5
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi

  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
  if test "x$USE_MAINTAINER_MODE" = xyes; then
    MAINT=
  else
    MAINT='#M#'
  fi
  


echo $ac_n "checking for loader (symbol LD)""... $ac_c" 1>&6
echo "configure:2163: checking for loader (symbol LD)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$LD" && LD=ld
cf_cv_subst_LD=$LD
fi

LD=${cf_cv_subst_LD}
echo "$ac_t""$LD" 1>&6


echo $ac_n "checking for archiver (symbol AR)""... $ac_c" 1>&6
echo "configure:2177: checking for archiver (symbol AR)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_AR'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$AR" && AR=ar
cf_cv_subst_AR=$AR
fi

AR=${cf_cv_subst_AR}
echo "$ac_t""$AR" 1>&6


echo $ac_n "checking for archiver options (symbol ARFLAGS)""... $ac_c" 1>&6
echo "configure:2191: checking for archiver options (symbol ARFLAGS)" >&5
if eval "test \"`echo '$''{'cf_cv_subst_ARFLAGS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
test -z "$ARFLAGS" && ARFLAGS=rc
cf_cv_subst_ARFLAGS=$ARFLAGS
fi

ARFLAGS=${cf_cv_subst_ARFLAGS}
echo "$ac_t""$ARFLAGS" 1>&6



# Check whether --with-mktexmf-default or --without-mktexmf-default was given.
if test "${with_mktexmf_default+set}" = set; then
  withval="$with_mktexmf_default"
  :
else
  with_mktexmf_default=yes
fi

# Check whether --with-mktexpk-default or --without-mktexpk-default was given.
if test "${with_mktexpk_default+set}" = set; then
  withval="$with_mktexpk_default"
  :
else
  with_mktexpk_default=yes
fi

# Check whether --with-mktextfm-default or --without-mktextfm-default was given.
if test "${with_mktextfm_default+set}" = set; then
  withval="$with_mktextfm_default"
  :
else
  with_mktextfm_default=yes
fi

# Check whether --with-mkocp-default or --without-mkocp-default was given.
if test "${with_mkocp_default+set}" = set; then
  withval="$with_mkocp_default"
  :
else
  with_mkocp_default=yes
fi

# Check whether --with-mkofm-default or --without-mkofm-default was given.
if test "${with_mkofm_default+set}" = set; then
  withval="$with_mkofm_default"
  :
else
  with_mkofm_default=yes
fi

# Check whether --with-mktextex-default or --without-mktextex-default was given.
if test "${with_mktextex_default+set}" = set; then
  withval="$with_mktextex_default"
  with_mktextex_default=yes
else
  with_mktextex_default=no
fi



# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:2261: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

# Check whether --enable-multiplatform or --disable-multiplatform was given.
if test "${enable_multiplatform+set}" = set; then
  enableval="$enable_multiplatform"
  if test "x$enable_multiplatform" = xyes &&
    test "x$bindir" = 'x${exec_prefix}/bin'
then
  bindir="$bindir/$host"
fi
fi


echo $ac_n "checking where the main texmf tree is located""... $ac_c" 1>&6
echo "configure:2293: checking where the main texmf tree is located" >&5
texmfmain=
if test "x$datadir" != 'x${prefix}/share'; then
  # First case, datadir is defined...
  eval p=\"$datadir\"
  # Unconditionally set the directory, but...
  texmfmain=`echo "$p/texmf" | sed 's,//*,/,g'`
  # ... do complain if it wasn't found.
  if test -d "$texmfmain"; then
    echo "$ac_t"""$texmfmain"" 1>&6
  else
    echo "$ac_t""not found" 1>&6
    echo "configure: warning: No texmf tree found at $texmfmain.
  If you do not have the files, you can retrieve a minimal set from
  ftp://ftp.tug.org/tex/texklib.tar.gz, which is mirrored on CTAN hosts
  in systems/web2c.  Winging it." 1>&2
  fi
else
  # Second case, datadir is default...
  if test "x$prefix" = "xNONE"; then
    p="$ac_default_prefix"
  else
    eval p=\"$prefix\"
  fi
  for e in share/texmf lib/texmf texmf; do
    if test -d "$p/$e"; then
      texmfmain="$p/$e"
      break
    fi
  done
  texmfmain=`echo "$texmfmain" | sed 's,//*,/,g'`
  if test -n "$texmfmain"; then
    echo "$ac_t"""$texmfmain"" 1>&6
  else
    eval texmfmain="$datadir/texmf"
    echo "$ac_t""not found" 1>&6
    echo "configure: warning: The main texmf tree was not found.
  Specify the location of its parent directory with the --datadir option.
  If you do not have the files, you can retrieve a minimal set from
  ftp://ftp.tug.org/tex/texklib.tar.gz, which is mirrored on CTAN hosts
  in systems/web2c.  Winging it by using the default location
  $texmfmain." 1>&2
  fi
fi



# Check whether --enable-local-texmf or --disable-local-texmf was given.
if test "${enable_local_texmf+set}" = set; then
  enableval="$enable_local_texmf"
  :
fi


if test "${enable_local_texmf+set}" = set; then
  case "x$enable_local_texmf" in
       x) TEXMF_LOCAL="texmf.local";;
      no) TEXMF_LOCAL="";;
       *) TEXMF_LOCAL="$enable_local_texmf";;
  esac
else
  TEXMF_LOCAL="texmf.local"
fi

echo $ac_n "checking where the local texmf tree is located""... $ac_c" 1>&6
echo "configure:2358: checking where the local texmf tree is located" >&5
texmflocal=
if test "x$TEXMF_LOCAL" = xno; then
  texmflocal=$texmfmain
  echo "$ac_t"""$texmflocal"" 1>&6
else
if test "x$datadir" != 'x${prefix}/share'; then
  # First case, datadir is defined...
  eval p=\"$datadir\"
  # Unconditionally set the directory, but...
  texmflocal=`echo "$p/$TEXMF_LOCAL" | sed 's,//*,/,g'`
  # ... do complain if it wasn't found.
  if test -d "$texmflocal"; then
    echo "$ac_t"""$texmflocal"" 1>&6
  else
    echo "$ac_t""not found" 1>&6
  fi
else
  # Second case, datadir is default...
  if test "x$prefix" = "xNONE"; then
    p="$ac_default_prefix"
  else
    eval p=\"$prefix\"
  fi
  for e in share/$TEXMF_LOCAL lib/$TEXMF_LOCAL $TEXMF_LOCAL; do
    if test -d "$p/$e"; then
      texmflocal="$p/$e"
      break
    fi
  done
  texmflocal=`echo "$texmflocal" | sed 's,//*,/,g'`
  if test -n "$texmflocal"; then
    echo "$ac_t"""$texmflocal"" 1>&6
  else
    eval texmflocal="$datadir/$TEXMF_LOCAL"
    echo "$ac_t""not found" 1>&6
  fi
fi
fi


#sinclude(../../libs/zlib/withenable.ac)
#sinclude(../../libs/libpng/withenable.ac)
#sinclude(../../libs/zlib/zlib.ac)
#sinclude(../../libs/libpng/libpng.ac)

# For METAFONT, three choices.
# Build separate mfw with windowing capabilities.
# Build windowing capabilities into mf.
# Do not build windowing capabilities into mf.
: ${with_mfw=mf} # Default.
if test "x$with_mfw" = xyes; then
  # --with-mfw=yes, build separate mfw with window support.
  MFW=
  MFN=
elif test "x$with_mfw" = xmf; then
  # --with-mfw=mf, build mf with selected window support.
  MFW=
  MFN='#N#'
else
  # --with-mfw=no, do not include window support.
  MFW='#W#'
  MFN=
fi



# For Omega.
if test -d $srcdir/omegadir; then
  test "${with_omega+set}" = set || with_omega=yes
else
  if test "x$with_omega" = xyes; then
    echo "configure: warning: The Omega sources are not available." 1>&2
  fi
  with_omega=no
fi
if test "x$with_omega" = xyes; then
  OMEGA=
  otpsmakefile=otps/Makefile
else
  OMEGA='#O#'
fi



# For pdfTeX.
subconfigures=pdftexdir/xpdf-0.80
if test -d $srcdir/pdftexdir; then
  # Create build dir, if necessary.
  test -d pdftexdir || mkdir pdftexdir
  test "${with_pdftex+set}" = set || with_pdftex=yes
else
  if test "x$with_pdftex" = xyes; then
    echo "configure: warning: The pdfTeX sources are not available." 1>&2
  fi
  with_pdftex=no
fi

# For pdfeTeX
if test -d $srcdir/pdfetexdir && test -d $srcdir/pdftexdir \
    && test -d $srcdir/etexdir; then
  test "${with_pdfetex+set}" = set || with_pdfetex=yes
else
  if test "x$with_pdfetex" = xyes; then
    echo "configure: warning: Not all sources of pdfeTeX are available." 1>&2
  fi
  with_pdfetex=no
fi

# Check whether C++ compiler works.  Prevent exit if it doesn't.
if test "x$with_pdftex" = xyes || test "x$with_pdfetex" = xyes; then
  # First test whether the compiler works in a subshell, and if so,
  # do it again in the main shell so we see the result.
(
  for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2477: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CXX"; then
  ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_CXX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CXX="$ac_cv_prog_CXX"
if test -n "$CXX"; then
  echo "$ac_t""$CXX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$CXX" && break
done
test -n "$CXX" || CXX="gcc"


echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:2510: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5

ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

cat > conftest.$ac_ext << EOF

#line 2521 "configure"
#include "confdefs.h"

int main(){return(0);}
EOF
if { (eval echo configure:2526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cxx_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cxx_cross=no
  else
    ac_cv_prog_cxx_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:2552: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross

echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:2557: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.C <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2566: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gxx=yes
else
  ac_cv_prog_gxx=no
fi
fi

echo "$ac_t""$ac_cv_prog_gxx" 1>&6

if test $ac_cv_prog_gxx = yes; then
  GXX=yes
else
  GXX=
fi

ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:2585: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
  ac_cv_prog_cxx_g=yes
else
  ac_cv_prog_cxx_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
  CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
  if test "$GXX" = yes; then
    CXXFLAGS="-g -O2"
  else
    CXXFLAGS="-g"
  fi
else
  if test "$GXX" = yes; then
    CXXFLAGS="-O2"
  else
    CXXFLAGS=
  fi
fi

) && {
  for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2622: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CXX"; then
  ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test $ac_x $ac_dir/$ac_word; then
      ac_cv_prog_CXX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CXX="$ac_cv_prog_CXX"
if test -n "$CXX"; then
  echo "$ac_t""$CXX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$CXX" && break
done
test -n "$CXX" || CXX="gcc"


echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:2655: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5

ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

cat > conftest.$ac_ext << EOF

#line 2666 "configure"
#include "confdefs.h"

int main(){return(0);}
EOF
if { (eval echo configure:2671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cxx_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cxx_cross=no
  else
    ac_cv_prog_cxx_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:2697: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross

echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:2702: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.C <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gxx=yes
else
  ac_cv_prog_gxx=no
fi
fi

echo "$ac_t""$ac_cv_prog_gxx" 1>&6

if test $ac_cv_prog_gxx = yes; then
  GXX=yes
else
  GXX=
fi

ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:2730: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
  ac_cv_prog_cxx_g=yes
else
  ac_cv_prog_cxx_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
  CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
  if test "$GXX" = yes; then
    CXXFLAGS="-g -O2"
  else
    CXXFLAGS="-g"
  fi
else
  if test "$GXX" = yes; then
    CXXFLAGS="-O2"
  else
    CXXFLAGS=
  fi
fi

} || {
  test "x$with_pdftex" = xyes \
    && echo "configure: warning: No C++ compiler: pdfTeX will not be compiled." 1>&2
  test "x$with_pdfetex" = xyes \
    && echo "configure: warning: No C++ compiler: pdfeTeX will not be compiled." 1>&2
  with_pdftex=no
  with_pdfetex=no
  true
}
fi

if test "x$with_pdftex" = xyes; then
  PTEX=
else
  PTEX='#P#'
  subconfigures=
fi


if test "x$with_pdfetex" = xyes; then
  PETEX=
else
  PETEX='#P#'
fi


# For e-TeX, three choices: no, yes, and tex.  In the latter case, we
# have to comment out the normal TeX build (TEX), as well as enable the
# e-TeX build (ETEX) and the replacement of TeX with e-TeX in compatibilty
# mode(CTEX).
if test -d $srcdir/etexdir; then
  test "${with_etex+set}" = set || with_etex=yes
else
  if test "x$with_etex" = xyes || test "x$with_etex" = xtex; then
    echo "configure: warning: The e-TeX sources are not available." 1>&2
  fi
  with_etex=no
fi
if test "x$with_etex" = xtex; then
  TEXBIN=etex
  CTEX=
  ETEX=
  TEX='#T#'
elif test "x$with_etex" = xyes; then
  TEXBIN=tex
  CTEX='#C#'
  ETEX=
  TEX=
else
  TEXBIN=tex
  CTEX='#C#'
  ETEX='#E#'
  TEX=
fi






# --with-x* options: Distinguish no X at all, no toolkit, or toolkit.
# If we find X, set shell vars x_includes and x_libraries to the
# paths, otherwise set no_x=yes.
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
echo "configure:2827: checking for X" >&5

# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
  withval="$with_x"
  :
fi

# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
  # The user explicitly disabled X.
  have_x=disabled
else
  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
    # Both variables are already set.
    have_x=yes
  else
if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # One or both of the vars are not set, and there is no cached value.
ac_x_includes=NO ac_x_libraries=NO
rm -fr conftestdir
if mkdir conftestdir; then
  cd conftestdir
  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
  cat > Imakefile <<'EOF'
acfindx:
	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
EOF
  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
    for ac_extension in a so sl; do
      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
        test -f $ac_im_libdir/libX11.$ac_extension; then
        ac_im_usrlibdir=$ac_im_libdir; break
      fi
    done
    # Screen out bogus values from the imake configuration.  They are
    # bogus both because they are the default anyway, and because
    # using them would break gcc on systems where it needs fixed includes.
    case "$ac_im_incroot" in
	/usr/include) ;;
	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
    esac
    case "$ac_im_usrlibdir" in
	/usr/lib | /lib) ;;
	*) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
    esac
  fi
  cd ..
  rm -fr conftestdir
fi

if test "$ac_x_includes" = NO; then
  # Guess where to find include files, by looking for this one X11 .h file.
  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h

  # First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
#line 2889 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  # We can compile using X headers with no special include directory.
ac_x_includes=
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  # Look for the header file in a standard set of common directories.
# Check X11 before X11Rn because it is often a symlink to the current release.
  for ac_dir in               \
    /usr/X11/include          \
    /usr/X11R6/include        \
    /usr/X11R5/include        \
    /usr/X11R4/include        \
                              \
    /usr/include/X11          \
    /usr/include/X11R6        \
    /usr/include/X11R5        \
    /usr/include/X11R4        \
                              \
    /usr/local/X11/include    \
    /usr/local/X11R6/include  \
    /usr/local/X11R5/include  \
    /usr/local/X11R4/include  \
                              \
    /usr/local/include/X11    \
    /usr/local/include/X11R6  \
    /usr/local/include/X11R5  \
    /usr/local/include/X11R4  \
                              \
    /usr/X386/include         \
    /usr/x386/include         \
    /usr/XFree86/include/X11  \
                              \
    /usr/include              \
    /usr/local/include        \
    /usr/unsupported/include  \
    /usr/athena/include       \
    /usr/local/x11r5/include  \
    /usr/lpp/Xamples/include  \
                              \
    /usr/openwin/include      \
    /usr/openwin/share/include \
    ; \
  do
    if test -r "$ac_dir/$x_direct_test_include"; then
      ac_x_includes=$ac_dir
      break
    fi
  done
fi
rm -f conftest*
fi # $ac_x_includes = NO

if test "$ac_x_libraries" = NO; then
  # Check for the libraries.

  test -z "$x_direct_test_library" && x_direct_test_library=Xt
  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc

  # See if we find them without any special options.
  # Don't add to $LIBS permanently.
  ac_save_LIBS="$LIBS"
  LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2963 "configure"
#include "confdefs.h"

int main() {
${x_direct_test_function}()
; return 0; }
EOF
if { (eval echo configure:2970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
ac_x_libraries=
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# First see if replacing the include by lib works.
# Check X11 before X11Rn because it is often a symlink to the current release.
for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
    /usr/X11/lib          \
    /usr/X11R6/lib        \
    /usr/X11R5/lib        \
    /usr/X11R4/lib        \
                          \
    /usr/lib/X11          \
    /usr/lib/X11R6        \
    /usr/lib/X11R5        \
    /usr/lib/X11R4        \
                          \
    /usr/local/X11/lib    \
    /usr/local/X11R6/lib  \
    /usr/local/X11R5/lib  \
    /usr/local/X11R4/lib  \
                          \
    /usr/local/lib/X11    \
    /usr/local/lib/X11R6  \
    /usr/local/lib/X11R5  \
    /usr/local/lib/X11R4  \
                          \
    /usr/X386/lib         \
    /usr/x386/lib         \
    /usr/XFree86/lib/X11  \
                          \
    /usr/lib              \
    /usr/local/lib        \
    /usr/unsupported/lib  \
    /usr/athena/lib       \
    /usr/local/x11r5/lib  \
    /usr/lpp/Xamples/lib  \
    /lib/usr/lib/X11	  \
                          \
    /usr/openwin/lib      \
    /usr/openwin/share/lib \
    ; \
do
  for ac_extension in a so sl; do
    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
      ac_x_libraries=$ac_dir
      break 2
    fi
  done
done
fi
rm -f conftest*
fi # $ac_x_libraries = NO

if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
  # Didn't find X anywhere.  Cache the known absence of X.
  ac_cv_have_x="have_x=no"
else
  # Record where we found X for the cache.
  ac_cv_have_x="have_x=yes \
	        ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
fi
fi
  fi
  eval "$ac_cv_have_x"
fi # $with_x != no

if test "$have_x" != yes; then
  echo "$ac_t""$have_x" 1>&6
  no_x=yes
else
  # If each of the values was on the command line, it overrides each guess.
  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
  # Update the cache value to reflect the command line values.
  ac_cv_have_x="have_x=yes \
		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
  echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
fi

if test "$no_x" = yes; then
  # Not all programs may use this symbol, but it does not hurt to define it.
  cat >> confdefs.h <<\EOF
#define X_DISPLAY_MISSING 1
EOF

  X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
else
  if test -n "$x_includes"; then
    X_CFLAGS="$X_CFLAGS -I$x_includes"
  fi

  # It would also be nice to do this for all -L options, not just this one.
  if test -n "$x_libraries"; then
    X_LIBS="$X_LIBS -L$x_libraries"
    # For Solaris; some versions of Sun CC require a space after -R and
    # others require no space.  Words are not sufficient . . . .
    case "`(uname -sr) 2>/dev/null`" in
    "SunOS 5"*)
      echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
echo "configure:3076: checking whether -R must be followed by a space" >&5
      ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
      cat > conftest.$ac_ext <<EOF
#line 3079 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:3086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_R_nospace=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_R_nospace=no
fi
rm -f conftest*
      if test $ac_R_nospace = yes; then
	echo "$ac_t""no" 1>&6
	X_LIBS="$X_LIBS -R$x_libraries"
      else
	LIBS="$ac_xsave_LIBS -R $x_libraries"
	cat > conftest.$ac_ext <<EOF
#line 3102 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:3109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_R_space=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_R_space=no
fi
rm -f conftest*
	if test $ac_R_space = yes; then
	  echo "$ac_t""yes" 1>&6
	  X_LIBS="$X_LIBS -R $x_libraries"
	else
	  echo "$ac_t""neither works" 1>&6
	fi
      fi
      LIBS="$ac_xsave_LIBS"
    esac
  fi

  # Check for system-dependent libraries X programs must link with.
  # Do this before checking for the system-independent R6 libraries
  # (-lICE), since we may need -lsocket or whatever for X linking.

  if test "$ISC" = yes; then
    X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
  else
    # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
    # libraries were built with DECnet support.  And karl@cs.umb.edu says
    # the Alpha needs dnet_stub (dnet does not exist).
    echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
echo "configure:3141: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3149 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:3160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_lib_dnet_dnet_ntoa = no; then
      echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
echo "configure:3182: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3190 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:3201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
    # to get the SysV transport functions.
    # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
    # needs -lnsl.
    # The nsl library prevents programs from opening the X display
    # on Irix 5.2, according to dickey@clark.net.
    echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
echo "configure:3230: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3235 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char gethostbyname(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gethostbyname();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
#else
gethostbyname();
#endif

; return 0; }
EOF
if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_gethostbyname=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_gethostbyname=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_gethostbyname = no; then
      echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
echo "configure:3279: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3287 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gethostbyname();

int main() {
gethostbyname()
; return 0; }
EOF
if { (eval echo configure:3298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # lieder@skyler.mavd.honeywell.com says without -lsocket,
    # socket/setsockopt and other routines are undefined under SCO ODT
    # 2.0.  But -lsocket is broken on IRIX 5.2 (and is not necessary
    # on later versions), says simon@lia.di.epfl.ch: it contains
    # gethostby* variants that don't use the nameserver (or something).
    # -lsocket must be given before -lnsl if both are needed.
    # We assume that if connect needs -lnsl, so does gethostbyname.
    echo $ac_n "checking for connect""... $ac_c" 1>&6
echo "configure:3328: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3333 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char connect(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
connect();
#endif

; return 0; }
EOF
if { (eval echo configure:3356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_connect=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_connect=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_connect = no; then
      echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:3377: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3385 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:3396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
    echo $ac_n "checking for remove""... $ac_c" 1>&6
echo "configure:3420: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3425 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char remove(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
remove();
#endif

; return 0; }
EOF
if { (eval echo configure:3448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_remove=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_remove=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_remove = no; then
      echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
echo "configure:3469: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3477 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {
remove()
; return 0; }
EOF
if { (eval echo configure:3488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
    echo $ac_n "checking for shmat""... $ac_c" 1>&6
echo "configure:3512: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3517 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shmat(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
shmat();
#endif

; return 0; }
EOF
if { (eval echo configure:3540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shmat=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shmat=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_shmat = no; then
      echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
echo "configure:3561: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lipc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3569 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {
shmat()
; return 0; }
EOF
if { (eval echo configure:3580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
else
  echo "$ac_t""no" 1>&6
fi

    fi
  fi

  # Check for libraries that X11R6 Xt/Xaw programs need.
  ac_save_LDFLAGS="$LDFLAGS"
  test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
  # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
  # check for ICE first), but we must link in the order -lSM -lICE or
  # we get undefined symbols.  So assume we have SM if we have ICE.
  # These have to be linked with before -lX11, unlike the other
  # libraries we check for below, so use a different variable.
  #  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
  echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
echo "configure:3613: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3621 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char IceConnectionNumber();

int main() {
IceConnectionNumber()
; return 0; }
EOF
if { (eval echo configure:3632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
else
  echo "$ac_t""no" 1>&6
fi

  LDFLAGS="$ac_save_LDFLAGS"

fi

if test "x$with_x" = xyes; then
  if test -n "$x_libraries"; then
    XLFLAG="-L$x_libraries"
    wlibs="-lX11 $wlibs $XLFLAG"
  else
    wlibs="-lX11 $wlibs"
  fi
  if test -z "$x_ext_lib"; then # allow envvar override
    echo $ac_n "checking for XextCreateExtension in -lXext""... $ac_c" 1>&6
echo "configure:3665: checking for XextCreateExtension in -lXext" >&5
ac_lib_var=`echo Xext'_'XextCreateExtension | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lXext $wlibs $X_EXTRA_LIBS $XLFLAG $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3673 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char XextCreateExtension();

int main() {
XextCreateExtension()
; return 0; }
EOF
if { (eval echo configure:3684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  x_ext_lib=-lXext
else
  echo "$ac_t""no" 1>&6
:
fi

  fi
  if test "x$with_x_toolkit" = xno; then
    wfile=x11-Xlib.c
  else
    # Effectively demote --with-x-toolkit=athena to xt since 
    # the code does not distinguish.
    x_tool_libs="-lXt $x_tool_libs"
    wfile=x11-Xt.c
  fi
  test -d window || mkdir window
  case "$srcdir" in
    /*) wfile=$srcdir/window/$wfile;;
    .)  ;;
    *)  wfile=../$srcdir/window/$wfile;;
  esac
  (cd window && (rm -f x11.c; $LN_S $wfile x11.c))
  cat >> confdefs.h <<\EOF
#define X11WIN 1
EOF

fi




# Don't bother with pdflib unless pdfTeX is requested.
if test "$with_pdftex" = yes; then
  libpdfmakefile=pdftexdir/Makefile
fi

# Don't bother with pdfelib unless pdfeTeX is requested.
if test "$with_pdfetex" = yes; then
  libpdfemakefile=pdfetexdir/Makefile
fi

test -d tests || mkdir tests

subdirs="$subconfigures"


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile c-auto.h:c-auto.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@WEB2CVERSION@%$WEB2CVERSION%g
s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@LN_S@%$LN_S%g
s%@SET_MAKE@%$SET_MAKE%g
s%@YACC@%$YACC%g
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@RANLIB@%$RANLIB%g
s%@CPP@%$CPP%g
s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
s%@LD@%$LD%g
s%@AR@%$AR%g
s%@ARFLAGS@%$ARFLAGS%g
s%@socketlibs@%$socketlibs%g
s%@MAINT@%$MAINT%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@texmfmain@%$texmfmain%g
s%@texmflocal@%$texmflocal%g
s%@MFN@%$MFN%g
s%@MFW@%$MFW%g
s%@OMEGA@%$OMEGA%g
s%@CXX@%$CXX%g
s%@PTEX@%$PTEX%g
s%@PETEX@%$PETEX%g
s%@TEXBIN@%$TEXBIN%g
s%@CTEX@%$CTEX%g
s%@ETEX@%$ETEX%g
s%@TEX@%$TEX%g
s%@X_CFLAGS@%$X_CFLAGS%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
s%@x_ext_lib@%$x_ext_lib%g
s%@x_tool_libs@%$x_tool_libs%g
s%@wlibs@%$wlibs%g
s%@subdirs@%$subdirs%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*|[A-z]:/*) # Absolute path.
    srcdir="$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  "") ;;
  [/$]*|[A-z]:/*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"`
  # Replace lines of the form ac_include foo with the contents of foo:
  # first, from the ac_include lines construct a list of file names.
  # From that list, we construct a second list of those files that exist.
  # Then we construct lists of sed commands for including those files,
  # and a sed command that removes the ac_include lines. We don't attempt
  # to read non-existent files because some (buggy) versions of sed choke
  # on this. Have to use sed because old (Ultrix, SunOS) awk does not support
  # getline or system. (Anyway, configure scripts aren't supposed to use awk.)
  # Can't use only one -e and commands {dr foo} because foo has to be last.
  # Be careful, because the filename may contain /.  Be careful with
  # whitespace; we need to use echo.
  # 
  # No support for the multiple-output file :-separated stuff.
  # 
  file_substs=`sed -n \
'/^ac_include/s%ac_include[ 	]*\(.*\)%\1%p' \
               "$ac_given_srcdir/$ac_file_in"`
  # Create the sed command line ...
  file_subst_cmd='sed'
  for ac_inc in $file_substs; do
    if test -f "$ac_given_srcdir/$ac_inc"; then
      ac_mung=`echo $ac_inc | sed 's,/,%,g'`
      file_subst_cmd="$file_subst_cmd -e '/^ac_include $ac_mung$/r $ac_inc'"
    fi
  done
  file_subst_cmd="$file_subst_cmd -e '/^ac_include/d'"
  # ... and fix the whitespace and escaped slashes.
  file_subst_cmd=`echo "$file_subst_cmd" | sed -e 's,%,\\\/,g' \
-e 's/ac_include /ac_include[ 	]*/g'`
  # cd into the srcdir because the files being included more or less
  # must be part of the distribution. I can't find any way to do
  # variable substitution in the sed commands (so the user could have,
  # e.g., $top_srcdir in their ac_include line).
  (cd $ac_given_srcdir && eval $file_subst_cmd $ac_file_in) \
  | sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	].*$%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="c-auto.h:c-auto.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

if test "$no_recursion" != yes; then

  # Remove --cache-file and --srcdir arguments so they do not pile up.
  ac_sub_configure_args=
  ac_prev=
  for ac_arg in $ac_configure_args; do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case "$ac_arg" in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
    esac
  done

  for ac_config_dir in $subconfigures; do

    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    if test ! -d $srcdir/$ac_config_dir; then
      continue
    fi

    echo configuring in $ac_config_dir

    case "$srcdir" in
    .) ;;
    *)
      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
      else
        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
      fi
      ;;
    esac

    ac_popdir=`pwd`
    cd $ac_config_dir

      # A "../" for each directory in /$ac_config_dir.
      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`

    case "$srcdir" in
    .) # No --srcdir option.  We are building in place.
      ac_sub_srcdir=$srcdir ;;
    /*|[A-z]:/*) # Absolute path.
      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
    *) # Relative path.
      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
    esac

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f ./configure; then
      ac_sub_configure=./configure
    elif test -f $ac_sub_srcdir/configure; then
      ac_sub_configure=$ac_sub_srcdir/configure
    elif test -f $ac_sub_srcdir/configure.in; then
      ac_sub_configure=$ac_configure
    else
      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
      ac_sub_configure=
    fi

    # The recursion is here.
    if test -n "$ac_sub_configure"; then

      # Make the cache file name correct relative to the subdirectory.
      case "$cache_file" in
      /*|[A-z]:/*) ac_sub_cache_file=$cache_file ;;
      *) # Relative path.
        ac_sub_cache_file="$ac_dots$cache_file" ;;
      esac
  case "$ac_given_INSTALL" in
        "") ;;
        [/$]*|[A-z]:/*) INSTALL="$ac_given_INSTALL" ;;
        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
        esac

      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
      # The eval makes quoting arguments work.
      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
      then :
      else
        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
      fi
    fi

    cd $ac_popdir
  done
fi

date >stamp-auto
